Product Documentation
The Traverser
Documentation:
- Installation Instructions (Linear), Version 1 Last revised: Jul 12, 2015
- Installation Instructions (Loop), Version 1 Last revised: Jul 12, 2015
- Assembly Instructions (Linear), Version 1 Last revised: Jul 12, 2015
- Assembly Instructions (Loop), Version 1 Last revised: Jul 12, 2015
- Circuit Board Instructions, Version 1 Last revised: Jul 12, 2015
- Parts list, Version 1 (with Digi-Key / Digi-Key Canada catalog numbers) Last revised: Jul 12, 2015
- Schematic diagram, Version 1 Last revised: May 01, 2014
- PIC16F753 Microcontroller Data Sheet Last revised: Jul 2016
- HEX format software image, Version 1 Last revised: May 04, 2014
Articles and Application Notes:
- The Traverser - Quick Start Last revised: Dec 05, 2015
- Loop Traverser - Quick Start Last revised: Dec 05, 2015
- Using The Traverser for a Loop of Track Last revised: Jul 12, 2015
| Specifications: | ||
| Version: | 1.00 | |
| Card size: | 3.00" x 2.25" | |
| Mounting hole size: | 0.125" Suitable for #4 screws | |
| Power supply requirements: | 12 volts AC, up to 1 ampere. | |
| Input power connector: | Screw terminals. Each terminal accepts 14-22 gauge wire | |
| Detection input connector: | 6-pin SIP header. Identical to the output connector on our Quad Occupancy Detector | |
| Detection inputs: | Four active-low inputs. Two for each end of track, two for each end's approach block | |
| Other input: | One active low input to hold train at next stop. | |
| Track power connector: | Screw terminals. Each terminal accepts 14-22 gauge wire | |
| Maximum track output voltage: | Adjustable from 6.5 volts to 11.0 volts (DC). | |
| Maximum track current: | 1 ampere. Actual maximum is limited to the capabilities of the 12 volt AC supply used | |
| Stop duration: | Default of 2 seconds. Other configurable choices: 5, 10, 15, 20, 30, 45, 60, 75, 90, 120, 150, 180, 210, 240, or 255 seconds | |
| ROHS compliant: | Yes | |
| Approximate kit assembly time: | 45 - 60 minutes | |